Description
An important advantage of our three layer forming fabrics is low warp density,another anvantage of this types: the weft wire of the wear surface spans a lot, that could gives the polyester forming fabrics a long life postential,the weft span would be 8 warp rather than common 6 or 5 warp, choosing the best polyester forming mesh type will save many costs in terms of clean operation, additive use, and vacuum, water, and electricity consumption.
Benefits：
1.For paper and board grades that require excellent printability.
2.Excellent formation and excellent fiber support.
3.No fabric marking and easy to clean.
4.Very good stable and wear resistance.
Application ：
1.Cigarette tissue,cigarette finer tissue,copy tissue,LC,LWC.
2.Newsprint,writing paper,carbonless paper,copper print.
3.Tissue napkin,tolite tissue.
4.Top or liner side for kraft and card board.
| Type | Warp Diameter(mm) |
Weft Diameter（mm) |
Warp Density |
Weft Density |
CFM | S/SL | FSI |
| BN6001 | 0.15/0.20 | 0.15，0.15 /0.35(PET)，0.35(PA66) |
70 | 55 | 313 | 52 | 160 |
| BN5601 | 0.15/0.20 | 0.13，0.13 /0.20(PET)，0.20(PA66) |
66 | 67 | 387 | 60 | 148 |
| BN5602 | 0.15/0.20 | 0.15，0.13 /0.25(PET)，0.25(PA66) |
65 | 65 | 344 | 59 | 145 |
| BN4801 | 0.18(PET)/0.22(PET) | 0.18(PET)/0.18(PA) | 52-53 | 56.5-57.5 | 348 | 57 | 126 |
| BN3401 | 0.25(PET)/0.30(PET) | 0.25(PET)/0.26(PA) | 37.5-38.5 | 36.0-37.0 | 424 | 43 | 81.6 |
| BN3801 | 0.22(PET)/0.28(PET) | 0.18(PET),0.20(PA), 0.40(PET),0.42(PA) |
41.5-42.5 | 48.0-49.0 | 411 | 47 | 91.3 |
Reviews
There are no reviews yet.