Entries by 管理2

The application of forming fabrics in vacuum boxes

The pulp concentration is between 2 and 3%, and the dewatering capacity of the chopping board and the vacuum board is significantly reduced. The dewatering here must be done with a vacuum suction box with a vacuum ranging from 10 to 33 KPa.   When the net passed through the vacuum suction box, it began […]

Prevent damage to the forming fabrics

1.Ensure that the surface of the roller is always smooth enough; Release air at both ends of the roller (about 2.5cm from the vacuum area) so that there is no slurry deposit on the roller; -. Usually, deposits on the rollers are not visible, but can be felt by hand; Check the spray water filter: […]

Classification and characteristics of synthetic fiber forming fabrics.

Because of its soft material, synthetic fiber forming fabrics can be designed for many kinds of weaving. General forming fabrics in the world today, according to its structure can be roughly divided into single layer (single layer of woven) and multilayer (multilayer woven), multilayer includes double (double layer weave), three layer (triple layer weave), etc. Single layer forming fabrics can be divided […]

The end connector of mesh belt.

  The development status of mesh belt joints Polyester mesh belt is extremely versatile. It can be applied in mine transport metallurgy, food, and paper industry. It is also an important piece of equipment for sewage treatment in environmental protection.With the development of the chemical industry, the polyester mesh belt has better performance and is […]